|
|
|
Remote Alarming
|
|
|
|
For as little as $390 per year, Zimmark's
Remote tank monitoring service, monitors critical tank levels and spill hazards,
avoiding unplanned process interuptions and environmental incidents.
|
|
|
|
Early or even better, pre-emptive detection
is the key to reducing the potential impact of a process interruption or environmental
risk. Containing the problem in a timely manner, and taking the appropriate response
minimizes impact and turns what could have been a major event, into a minor occurrence.
|
|
|
|
|
|
|
|
Zimmark's Z-24-7 Remote Tank Monitoring service, is an inexpensive means to provide
24/7 monitoring and response. Working with your personnel we identify key points
in your Fluid or Waste Management Process that requires on-going monitoring. Identifying
an alarm point is based on the potential impact associated with an undetected incident
or spill.
|
|
|
|
Depending on the specific needs of our clients, we provide Z-24-7 as a complete
turn-key remote tank monitoring service as part of our on-site fluid or waste management
services, or as a stand alone monitoring program that ensures that process or environmental
incidents are quickly detected and appropriate plant personnel notified day or night.
|
|
|
|
The remote tank monitoring system can be configured with as many process points
as necessary with each alarm condition generating a customized voice recorded message.
Using a phone line or internet connection, the system automatically contacts our
live call center. The alarm can be remotely acknowledged and based on the urgency
and condition, appropriate personnel are contacted immediately.
|
|
|
|
Alarm conditions occur,the severity of the event depends on the speed of response
and the corrective actions taken. Z-24-7 Remote Tank Monitoring significantly reduces
response time and our custom alarming with appropriate procedures takes the guess
work out the planned response.
|
|
|
|
"During the night shift, no one goes into waste treatment. If we didn't get the
call from Zimmark's Remote monitoring system, the pump would have continued to leak
waste water all over the floor and eventually out the back door. Before installing
the system, the call we would have gotten would have been from the plant next door.
The Remote alarming system let us address the problem before it turned into an environmental
nightmare, before we had to call the EPA."
|
|
|
|
Typical Alarm Points:
|
- Coolant Plant Supply Low Level - know your supply is low before it impacts production
- Waste Tank High Level - Know your tank is full before it overflows
- Floor Liquid Level Detection - As soon as any significant volume of fluid hits the
floor, know it so that you can act before an environmental release occurs
|
|
|
|
Our programs are customized to the facility and can include any of the following
items:
|
|
|
- Initial System design, installation and commissioning based on the specific high
risk points in the facility
- Alarm condition monitoring with customized voice messaging per alarm point
- Continuous Follow-up by a Live 24/7 operator until they reach a Live person that
accepts responsibility
- Email record of every alarm event to track response and timing of events
- Managed Dashboard that provides summary of alarm events and planned PM's.
|
|
|
|
Low cost service: from $390 per year for monitoring,
24-7 response, email response and web enabled summary dashboard. We keep calling
until we get a live person that can respond to the emergency. Click on the Request
Information Button below to get further details or call/email us now.
|
|
|
|
Call: 888-632-5410
Email:
zimmark@zimmark.com
|